Description
MOBILE MODULE
4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
3GPP RELEASE
Release 11
ESIM*
Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
Feature availability varies by order code
SIM SWITCH*
Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Feature availability varies by order code
STATUS
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS
SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
BLOCK/ALLOW LIST
Operator block/allow list (by country or separate operators)
MULTIPLE PDN
Possibility to use different PDNs for multiple network access and services
BAND MANAGEMENT
Band lock, Used band status display
SIM PIN CODE MANAGEMENT
SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
APN
Auto APN
BRIDGE
Direct connection (bridge) between mobile ISP and device on LAN
PASSTHROUGH
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS MODE
802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
WI-FI SECURITY
WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID
SSID stealth mode and access control based on MAC address
WI-FI USERS
Up to 100 simultaneous connections
WIRELESS CONNECTIVITY FEATURES
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
WIRELESS MAC FILTER
Allowlist, blocklist
WIRELESS QR CODE GENERATOR
Once scanned, a user will automatically enter your network without needing to input login information
TRAVELMATE
Forward Wi-Fi hotspot landing page to a subsequent connected device
WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
ROUTING
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
NETWORK PROTOCOLS
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP()S, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VOIP PASSTHROUGH SUPPORT
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
CONNECTION MONITORING
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FIREWALL
Port forward, traffic rules, custom rules, TTL target customisation
FIREWALL STATUS PAGE
View all your Firewall statistics, rules, and rule counters
PORT MANAGEMENT
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
NETWORK TOPOLOGY
Visual representation of your network, showing which devices are connected to which other devices
DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QOS / SMART QUEUE MANAGEMENT (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
Supported >77 service providers, others can be configured manually
DNS OVER HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
NETWORK BACKUP
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
LOAD BALANCING
Balance Internet traffic over multiple WAN connections
HOTSPOT
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
HOTSPOT 2.0
Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
SSHFS
Possibility to mount remote file system via SSH protocol
VRF SUPPORT
Initial virtual routing and forwarding (VRF) support
TRAFFIC MANAGEMENT
Real-time monitoring, wireless signal charts, traffic usage history
PORT MIRRORING
Mirroring network traffic on Ethernet ports for monitoring and analysis
SECURITY
Authentication, Firewall, Attack Prevention, VLAN, Mobile Quota Control, Web Filter, Access Control, Certificate Manager
VPN
Supports OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc
BACNET, OPC UA, MODBUS, DNP3, DLMS/COSEM
Full support for industrial communication protocols
API, MONITORING & MANAGEMENT, IoT PLATFORMS
Teltonika Web API, Web UI, FOTA, SSH, SMS, TR-069, MQTT, SNMP, JSON-RPC, RMS, AWS IoT Core, Azure IoT Hub, ThingWorx, Cumulocity
SYSTEM CHARACTERISTICS
CPU: Mediatek 580 MHz MIPS 24KEc; RAM: 128 MB DDR2; FLASH: 16 MB SPI Flash
FIRMWARE CUSTOMISATION
RutOS (OpenWrt based), supports Lua, C, C++, SDK, GPL customization, and Package Manager
LOCATION TRACKING
Supports GPS, GLONASS, BeiDou, Galileo, QZSS with NMEA and NTRIP protocols
SERIAL INTERFACES
RS232, RS485, USB 2.0, data rate, external device support, and multiple storage formats
INPUT / OUTPUT
Multiple digital, analog, and relay I/O with juggler-based event automation
SD CARD
Micro SD up to 2 TB, supports FAT32, NTFS, ext2, ext3, ext4
POWER
4-pin industrial DC power socket, 9–30 VDC, passive PoE supported, <7 W max consumption
PHYSICAL INTERFACES
4 x RJ45 ports, I/Os, LEDs, SIM slots, antenna ports, USB, RS232, RS485, reset button
PHYSICAL SPECIFICATION
Aluminium housing, 110 x 50 x 100 mm, 287 g, mountable on DIN rail or wall
OPERATING ENVIRONMENT
Operating temperature -40°C to 75°C, humidity 10–90% non-condensing, IP30
REGULATORY & TYPE APPROVALS
CE, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, UL/CSA, CB, RoHS, REACH, and more
EMC EMISSIONS & IMMUNITY
Complies with EN 55032, EN 55035, EN 61000 series, EN 301 489 series
RF STANDARDS
EN 300 328, EN 301 511, EN 301 908, EN 303 413
SAFETY (ORDINARY LOCATIONS)
CE, RCM, CB, UL/CSA standards compliance
SAFETY (HAZARDOUS LOCATIONS)
UL 121201, CAN/CSA C22.2 No. 213, Class I Division 2, Zone 2, Group IIC, -40°C ≤ Ta ≤ 75°C, T4, IP30










Reviews
There are no reviews yet.