Menu Close

Shop

OTD500

49,456.00

The OTD500 is a durable 5G outdoor router built for reliable connectivity in demanding environments. Its IP55-rated housing withstands harsh conditions, and the integrated mounting bracket enables quick, hassle-free installation. Dual SIM and eSIM with automatic switching provide exceptional network flexibility and redundancy. Gigabit Ethernet ports with PoE-in and PoE-out simplify setup by combining power and data in a single cable. Fully RMS-compatible, the OTD500 offers effortless remote management, making it perfect for outdoor connectivity solutions.

Category: Brand:

Description

MOBILE MODULE
The device supports 5G Sub-6 GHz SA/NSA with download speeds of 2.4 / 3.4 Gbps (4×4 MIMO) and upload speeds of 900 / 550 Mbps (2×2 MIMO). 4G LTE Cat 19 provides downlink up to 1.6 Gbps and uplink Cat 18 up to 200 Mbps. 3G connectivity offers 42 Mbps downlink and 5.76 Mbps uplink.

3GPP RELEASE
Release 16.

ESIM
Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans.

SIM SWITCH
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection.

STATUS
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC.

SMS
SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP.

USSD
Supports sending and reading Unstructured Supplementary Service Data messages.

BLOCK / ALLOW LIST
Operator block/allow list by country or individual operators.

BAND MANAGEMENT
Band lock, used band status display.

SIM IDLE PROTECTION SERVICE
Configurable periodic SIM switching to prevent SIM card blocking by maintaining activity.

SIM PIN CODE MANAGEMENT
Set, change, or disable SIM card PIN.

APN
Auto APN.

BRIDGE
Direct bridge connection between mobile ISP and LAN device.

PASSTHROUGH
Router assigns mobile WAN IP address directly to a LAN device.

FRAMED ROUTING
Support for an IP network behind 5G UE.

ETHERNET
2 × Ethernet ports (configurable as WAN), 10/100/1000 Mbps, IEEE 802.3, 802.3u, 802.3az compliant, auto MDI/MDIX.

POE IN
1 × PoE In.

POE STANDARDS (IN)
IEEE 802.3af/at.

POE OUT
1 × PoE Out.

POE STANDARDS (OUT)
IEEE 802.3af Alternative B.

POE MAX POWER PER PORT (AT PSE)
15 W max (power supply dependent).

NETWORK ROUTING
Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing.

NETWORK PROTOCOLS
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake-on-LAN, VXLAN.

VOIP PASSTHROUGH SUPPORT
H.323 and SIP-ALG NAT helpers.

CONNECTION MONITORING
Ping reboot, Wget reboot, periodic reboot, LCP and ICMP link inspection.

FIREWALL
Port forwarding, traffic rules, custom rules, TTL target customization.

FIREWALL STATUS PAGE
Firewall statistics, rules, and rule counters.

PORT MANAGEMENT
Enable/disable ports, auto-configuration, transmission speed configuration.

NETWORK TOPOLOGY
Visual representation of connected network devices.

DHCP
Static and dynamic IP allocation, DHCP relay, server configuration, static leases with MAC wildcards.

QOS / SMART QUEUE MANAGEMENT (SQM)
Traffic prioritization by source, destination, service, protocol, or port; WMM, 802.11e.

DDNS
Support for more than 77 service providers; manual configuration supported.

DNS OVER HTTPS
Secure DNS resolution via HTTPS proxy.

NETWORK BACKUP
VRRP and wired automatic failover options.

LOAD BALANCING
Traffic distribution across multiple WAN connections.

HOTSPOT
Captive portal with internal/external RADIUS, MAC authentication, SMS authorization, SSO, internal/external landing pages, walled garden, user scripts, URL parameters, user groups, per-user or group limits, user management, 9 customizable themes.

SSHFS
Remote file system mounting via SSH.

VRF SUPPORT
Initial virtual routing and forwarding support.

TRAFFIC MANAGEMENT
Real-time monitoring, wireless signal charts, traffic usage history.

SECURITY – AUTHENTICATION
Pre-shared keys, digital certificates, X.509, TACACS+, internal/external RADIUS, IP and login attempt blocking, time-based login blocking, random password generator.

SECURITY – FIREWALL
WebUI-enabled firewall, full CLI configuration, DMZ, NAT, NAT-T, NAT64.

ATTACK PREVENTION
DDoS protection, SSH brute-force prevention, HTTP/HTTPS attack prevention, port scan protection.

VLAN
Port- and tag-based VLAN separation.

MOBILE QUOTA CONTROL
Mobile data limits with configurable periods, warnings, and notifications.

WEB FILTER
Website block and allow lists.

ACCESS CONTROL
Access control for SSH, WebUI, CLI, and Telnet.

TPM
TPM 2.0 identification and authentication module.

CERTIFICATE MANAGER
CA, server, client, Let’s Encrypt, and SCEP certificate management.

802.1X
Port-based network access control server.

VPN – OPENVPN
Simultaneous multiple clients and server instances, 27 encryption methods.

OPENVPN ENCRYPTION
DES, 3DES, AES-128/192/256 (CBC, CFB, OFB, GCM), BF-CBC, CAST5, RC2 variants.

IPSEC
XFRM, IKEv1/IKEv2, 14 encryption methods including AES-GCM variants.

GRE
GRE tunneling, GRE over IPsec support.

PPTP / L2TP
Client and server support, L2TPv3, L2TP over IPsec.

STUNNEL
TLS encryption proxy for existing services.

DMVPN
Scalable IPsec VPNs, Phase 2 and 3, dual hub support.

SSTP
SSTP client support.

ZEROTIER
ZeroTier VPN client support.

WIREGUARD
WireGuard VPN client and server support.

TINC
Encrypted, authenticated tunnels with compression.

TAILSCALE
Encrypted point-to-point connectivity using WireGuard protocol.

OPC UA
Client and Server modes, TCP connections.

MODBUS
Client and Server modes over TCP, custom registers, multiple data formats.

DATA TO SERVER
HTTP(S), MQTT, Azure MQTT; multi-source data extraction with Lua scripting.

MQTT GATEWAY
Modbus MQTT Gateway support.

DNP3
Station and Outstation modes over TCP.

DLMS / COSEM
Client mode over TCP.

API
Teltonika Networks Web API (beta).

MONITORING & MANAGEMENT – WEB UI
HTTP/HTTPS management, configuration, firmware updates, logs, CLI access.

FOTA
Firmware update from server with notifications.

SSH
SSH v1 and v2 support.

EMAIL
Service status alert notifications.

SMS
SMS status and configuration.

CALL
Reboot, status, mobile data control, I/O control, call handling with timer.

TR-069
Support for major ACS platforms.

MQTT
MQTT broker and publisher.

SNMP
SNMP v1/v2/v3, traps, brute-force protection.

JSON-RPC
Management API over HTTP/HTTPS.

RMS
Teltonika Remote Management System.

IOT PLATFORMS – THINGWORX
Monitoring of WAN, IP, operator, signal strength, network type.

IOT PLATFORMS – CUMULOCITY
Device monitoring, reboot, and firmware upgrades.

IOT PLATFORMS – AZURE IOT HUB
Cloud data integration, direct methods, zero-touch provisioning.

IOT PLATFORMS – AWS IOT CORE
AWS Jobs and API interaction support.

SYSTEM CHARACTERISTICS – CPU
MediaTek dual-core 880 MHz MIPS1004Kc.

RAM
256 MB DDR3.

FLASH STORAGE
16 MB NOR flash, 256 MB NAND flash.

FIRMWARE / CONFIGURATION – WEB UI
Firmware updates, configuration profiles, backups.

KEEP SETTINGS
Firmware updates without configuration loss.

FACTORY SETTINGS RESET
Restores all system settings to manufacturer defaults.

FIRMWARE CUSTOMISATION – OPERATING SYSTEM
RutOS (OpenWrt-based Linux).

SUPPORTED LANGUAGES
BusyBox shell, Lua, C, C++, Python, Java.

DEVELOPMENT TOOLS
SDK with build environment.

GPL CUSTOMIZATION
Custom firmware and web UI branding.

PACKAGE MANAGER
Installation of additional services.

POWER – CONNECTOR
RJ45 socket.

INPUT VOLTAGE RANGE
42.5–57.0 VDC with protections.

POWER CONSUMPTION
Idle < 2.5 W, max < 9 W, PoE max < 24 W.

PHYSICAL INTERFACES – ETHERNET
2 × RJ45 ports, 10/100/1000 Mbps.

STATUS LEDS
Mobile connection type and strength LEDs, Ethernet status LEDs.

SIM
2 × Mini SIM (2FF), 1.8 V / 3 V.

ANTENNAS
4 × internal antennas.

ANTENNA SPECIFICATIONS
617–960 / 1695–2690 / 3300–4200 / 4200–5000 MHz, 50 Ω, VSWR < 3.5, gain < 4.9 dBi, omnidirectional.

RESET
Reboot, user default, and factory reset button.

PHYSICAL SPECIFICATION – CASING MATERIAL
Plastic (PC+ASA).

DIMENSIONS (W × H × D)
110 × 49.3 × 235 mm.

WEIGHT
385 g.

MOUNTING OPTIONS
Bracket for wall or pole mounting.

OPERATING ENVIRONMENT – TEMPERATURE
-40 °C to 55 °C.

OPERATING HUMIDITY
10% to 90% non-condensing.

INGRESS PROTECTION RATING
IP55.

REGULATORY & TYPE APPROVALS
CE, UKCA, RCM, CB, EAC, UCRF, WEEE.

EMC, RF, SAFETY STANDARDS
Compliance with EN, IEC, ETSI, AS/NZS standards as listed.

Additional information

Cellular Connectivity

Serial

No serial interface

Reviews

There are no reviews yet.

Be the first to review “OTD500”

Your email address will not be published. Required fields are marked *

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare