TRB142

Description

Mobile

Mobile module
4G LTE Cat 1 up to 10 DL/5 UL Mbps; 3G up to 384 DL/384 UL kbps; 2G up to 296 DL/236.8 UL kbps

3GPP Release
Release 12

Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS
SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD
Supports sending and reading Unstructured Supplementary Service Data messages

Block/Allow list
Operator block/allow list (by country or separate operators)

Multiple PDN
Possibility to use different PDNs for multiple network access and services

Band management
Band lock, Used band status display

SIM PIN code management
SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN

APN
Auto APN

Bridge
Direct connection (bridge) between mobile ISP and device on LAN

Passthrough
Gateway assigns its mobile WAN IP address to another device on LAN

Network

Routing
Static routing

Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT

VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall
Port forward, traffic rules, custom rules, TTL target customisation

Firewall status page
View all your Firewall statistics, rules, and rule counters

Port management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology
Visual representation of your network, showing which devices are connected to which other devices

DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS
Supported >77 service providers, others can be configured manually

DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup
Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

SSHFS
Possibility to mount remote file system via SSH protocol

Traffic Management
Real-time monitoring, wireless signal charts, traffic usage history

Security

Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall
Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64

Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN
Port and tag-based VLAN separation

Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control
Flexible access control of SSH, Web interface, CLI and Telnet

Certificate Manager
Certificate creation tool allows to create CA, server, client, let’s encrypt, SCEP certificates

VPN

OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption
(Detailed list of encryption methods retained as-is)

IPsec
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec

GRE
GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN
Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support

SSTP
SSTP client instance support

ZeroTier
ZeroTier VPN client support

WireGuard
WireGuard VPN client and server support

Tinc
Tinc offers encryption, authentication and compression in its tunnels. Client and server support.

OPC UA

Supported modes
Client, Server

Supported connection types
TCP

MODBUS

Supported modes
Server, Client

Supported connection types
TCP, RTU (RS232)

Custom registers
MODBUS TCP custom register block requests

Supported data formats
8-bit, 16-bit, and 32-bit formats as listed

DATA TO SERVER

Protocol
HTTP(S), MQTT, Azure MQTT

Data to server
Extract parameters from multiple sources and send to a single server; supports custom LUA scripting

MQTT Gateway
Modbus MQTT Gateway – allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

Supported modes
Station, Outstation

Supported connection
TCP, RTU (RS232)

DLMS/COSEM

DLMS Support
DLMS – standard protocol for utility meter data exchange

Supported modes
Client

Supported connection types
TCP, RTU (RS232)

API

Teltonika Networks Web API (beta) support
Set of configurable API endpoints.
Docs: https://developers.teltonika-networks.com

Monitoring & Management

WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, logs, etc.

FOTA
Firmware update from server, automatic notification

SSH
SSH (v1, v2)

SMS
SMS status, SMS configuration

Call
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with timer

TR-069
Supports multiple ACS platforms

MQTT
MQTT Broker, MQTT publisher

SNMP
SNMP (v1, v2, v3), SNMP Trap, brute-force protection

JSON-RPC
Management API over HTTP/HTTPS

RMS
Teltonika Remote Management System (RMS)

IoT Platforms

ThingWorx
WAN and mobile monitoring support

Cumulocity – Cloud of Things
Monitors key parameters and supports reboot/firmware upgrade actions

Azure IoT Hub
Supports Data to Server, Direct methods, and Plug and Play provisioning

AWS IoT Core
Supports AWS Jobs functionality and API interaction

System Characteristics

CPU
ARM Cortex-A7 1.2 GHz

RAM
128 MB, DDR2

FLASH storage
512 MB, SPI Flash

Firmware / Configuration

WEB UI
Update FW, configuration profiles, backup

FOTA
Update FW

RMS
Remote update and configuration

Keep settings
Update FW without losing current configuration

Factory settings reset
Restores all settings to manufacturer defaults

FIRMWARE CUSTOMISATION

Operating system
RutOS (OpenWrt-based Linux OS)

Supported languages
Busybox shell, Lua, C, C++, Python (via Package manager)

Development tools
SDK package with build environment

GPL customization
Create custom branded firmware and web UI

Package Manager
Install additional software packages

Input / Output

Configurable I/O
2 x Configurable Inputs/Outputs with voltage specs

Output control
HTTP POST/GET, Schedule

Events
Email, RMS, SMS

I/O juggler
Set I/O conditions to initiate events

Power

Connector
4-pin industrial DC power socket

Input voltage range
9 – 30 VDC, reverse polarity and surge protection

Power consumption
< 5 W

Physical Interfaces

I/O’s
2 x Configurable I/O pins

Status LEDs
3 x connection type, 5 x signal strength, 1 x Power LED

SIM
1 x Mini SIM (2FF), 1.8 V/3 V

Power
1 x 4-pin power connector

Antennas
1 x SMA for LTE

USB
1 x Virtual network interface via micro USB

RS232
1 x DB9 socket

Reset
Reboot/User default reset/Factory reset button

Physical Specification

Casing material
Aluminium housing

Dimensions (W x H x D)
74.5 x 25 x 64.4 mm

Weight
135 g

Mounting options
DIN rail, wall mount, flat surface (optional kits)

Operating Environment

Operating temperature
-40 °C to 75 °C

Operating humidity
10% to 90% non-condensing

Ingress Protection Rating
IP30

Regulatory & Type Approvals

Regulatory
CE, UKCA, EAC, UCRF, ANRT, Kenya, ICASA, Anatel, Arcotel, NOM, RCM, Giteki, NTC, SRRC, NAL, NBTC, CB

Operator
Deutsche Telekom AG

EMC Emissions & Immunity

Standards
Draft EN 301 489-1 V2.2.0, EN 301 489-52 V1.1.0, etc.

RF

Standards
EN 301 511 V12.5.1, EN 301 908 series

Safety

Standards
CE, UL/CSA, RCM, CB – various editions listed